"/>

מתאם HP 654540-001 SAS/SATA/SSD 2.5 to 3.5 Drive Adapter

מתאם hp 654540-001 SAS/SATA/SSD 2.5 to 3.5 Drive Adapter FOR 651314-001 F238F tray
HP 654540-001 HP 2.5 INCH TO 3.5 ADAPTER TRAY

חבילה מומלצת

צרו קשר

תיאור מוצר

חוות דעת

מאפיינים ושידרוגים:

פרטים נוספים:

  • מקט: 4787
  • אחריות: 12 חודשים
  • אחריות: ע"י נובוטק 
  • זמן אספקה: עד21ימי עסקים
  • אפשרויות משלוח:
    אפשרויות משלוח למוצר לבחירה בקופה:
    • איסוף עצמי בחינם
    • דואר רשום 25.00 ₪
    • משלוח עד הבית עם שליח 45.00 ₪
    • משלוח מהיר תוך 24 שעות - ליעדים בין חדרה לגדרה 85.00 ₪
    • משלוח לנקודת איסוף - חבילות קטנות 19.00 ₪
    סגירה

מחיר   ₪ 325.00 ILS 11/7/2027 In stock HP 4787 4787

קנה עכשיו הוסף לסל
  • +
  • -
visaisracardmastercarddinersamerican express

מתאם hp 654540-001 SAS/SATA/SSD 2.5 to 3.5 Drive Adapter FOR 651314-001 F238F tray

  • Adapts any 2.5" SATA SSD or hard drive for use in any 3.5" drive tray
  • Designed for hot-swap capable drive cages and cases
  • Can be used anywhere a 3.5" drive is normally used, including computer drive bays and side or bottom mount drive enclosure trays
  • Effectively conducts and convects away heat to help maintain the long-term reliability of high-performance SSDs and hard drives
  • Compatible with 3Gb/s and 6Gb/s SATA SSDs and hard disk drives

HP 654540-001 2.5" SAS/SATA/SSD to 3.5" Drive Adapter Converter
Brand New with 4 x 2.5" +4 x 3.5" Drive Screws
Note: This adapter can convert any 2.5" SAS/SATA/SSD drive to 3.5" form factor. However, for 2.5" SAS drives,
this adapter will change dual port to single port. This is fine for most applications. But if your application requires dual port,
this adapter will not work for you. And, as always, a SAS controller is required in order to support SAS drives.
A 2.5" SAS drives with this adapter installed will not work on a SATA controller although its connector looks exactly 
the same as a normal SATA connector Note: This adapter is compatible with all the 3.5" SAS/SATA drive caddie trays from HP, Dell, IBM, or other manufacturers, 
such as HP 651314-001, IBM 69Y5284, or Dell F238F.dell kg1ch
Description:
This adapter can adapts any 2.5" form factor SAS/SATA/SSD Drive to 3.5" form factor drive, 
without cables or hassles. • Standard position mounting holes on Adapter's bottom and sides, 
equivalent to those found on a 3.5" hard drive, give you the flexibility to mount it anywhere a 3.5" drive is used. • Adapter's fixed mount connectors are attached to a simple circuit board, assuring solid connections between devices, 
and the outside connector is positioned to plug into a backplane as the tray is inserted.
• Compatible with 3Gb/s and 6Gb/s SAS/SATA/SSD drives.
•No loss in data transfer speeds—no bridge chip used
• Structure -- SECC(Steel Electrogalvanized Cold-rolled Coil) Steel body
Package Contents:
•1 x 2.5" to 3.5" SATA SSD HDD Adapter(654540-001)
•4 x 2.5" Drive Screws + 4 x 3.5 " Drive Screws

 

חוות דעת על המוצר

ממוצע דירוג מוצר ( חוות דעת גולשים) , כתוב חוות דעת למוצר

מתאם hp 654540-001 SAS/SATA/SSD 2.5 to 3.5 Drive Adapter FOR 651314-001 F238F tray

  • Adapts any 2.5" SATA SSD or hard drive for use in any 3.5" drive tray
  • Designed for hot-swap capable drive cages and cases
  • Can be used anywhere a 3.5" drive is normally used, including computer drive bays and side or bottom mount drive enclosure trays
  • Effectively conducts and convects away heat to help maintain the long-term reliability of high-performance SSDs and hard drives
  • Compatible with 3Gb/s and 6Gb/s SATA SSDs and hard disk drives

HP 654540-001 2.5" SAS/SATA/SSD to 3.5" Drive Adapter Converter
Brand New with 4 x 2.5" +4 x 3.5" Drive Screws
Note: This adapter can convert any 2.5" SAS/SATA/SSD drive to 3.5" form factor. However, for 2.5" SAS drives,
this adapter will change dual port to single port. This is fine for most applications. But if your application requires dual port,
this adapter will not work for you. And, as always, a SAS controller is required in order to support SAS drives.
A 2.5" SAS drives with this adapter installed will not work on a SATA controller although its connector looks exactly 
the same as a normal SATA connector Note: This adapter is compatible with all the 3.5" SAS/SATA drive caddie trays from HP, Dell, IBM, or other manufacturers, 
such as HP 651314-001, IBM 69Y5284, or Dell F238F.dell kg1ch
Description:
This adapter can adapts any 2.5" form factor SAS/SATA/SSD Drive to 3.5" form factor drive, 
without cables or hassles. • Standard position mounting holes on Adapter's bottom and sides, 
equivalent to those found on a 3.5" hard drive, give you the flexibility to mount it anywhere a 3.5" drive is used. • Adapter's fixed mount connectors are attached to a simple circuit board, assuring solid connections between devices, 
and the outside connector is positioned to plug into a backplane as the tray is inserted.
• Compatible with 3Gb/s and 6Gb/s SAS/SATA/SSD drives.
•No loss in data transfer speeds—no bridge chip used
• Structure -- SECC(Steel Electrogalvanized Cold-rolled Coil) Steel body
Package Contents:
•1 x 2.5" to 3.5" SATA SSD HDD Adapter(654540-001)
•4 x 2.5" Drive Screws + 4 x 3.5 " Drive Screws

 

חוות דעת על המוצר

ממוצע דירוג מוצר ( חוות דעת גולשים) , כתוב חוות דעת למוצר

לקוחות שראו מוצר זה קנו גם...

לא מצאתם את מה שחיפשתם? השאירו פרטים ונחזור אליכם בהקדם!

דלג לתוכן מרכזי